Aluminium window software: from casement to composite frame
Windows, doors, sliders and fixed lights, on their own or brought together in a composite frame: each one is drawn, priced and cut.
Aluminium windows, doors, sliders and fixed lights
The supplied models cover the usual products; any other model can be set up.
Windows: casement, tilt-and-turn, bottom-hung, top-hung, pivot, vertical sliding
Inward and outward-opening casements, tilt-and-turn, bottom-hung, top-hung projecting, pivot and vertical sliding windows, with 1 or 2 leaves.
Aluminium doors: French doors, single doors, doors with transom
Single doors, front or internal, French doors and doors with a transom light.
Pocket sliders and lift-and-slide doors
Sliders with 2 or 3 leaves, pocket sliders and lift-and-slide doors.
Fixed lights, partitions, balustrades and slimline frames
Transom lights, lower panels and fixed frames, slimline or demountable partitions, fixed or with a door, and balustrades.
Composite frames: several products in a single frame
The frame designer places mullions, transoms, outer frames and cover strips, then a window or door in each cell. The software adds up the cuts, hardware, gaskets and glazing of every cell.
A composite frame is saved in the library and reused from one project to the next.
-
Tilt and turn over a panel -
2 sashes under a transom -
2 sashes between side lights -
Slider over fixed lights -
Slider, side lights and transom -
Door, side light and transom
What the software calculates for each product
From the width, the height and the options, CUTTER SOFT calculates:
- the cut lengths and angles of each profile;
- the hardware and gaskets;
- the glazing and panels, with their areas;
- the price, with your price lists.
Profile systems, series and finishes: RAL, anodising, sublimation
Any profile system, no supplier imposed: your series, your colours and your rules.
The frame in its real colour
Each frame is drawn in the real colour of the bar: RAL powder coating, anodising or sublimation.
- Finishes
- RAL, anodising, sublimation
- Prices
- Per kilo by series, per m² by colour
Alerts before the workshop
A dimension outside the series limits, glazing too thick or out of range: the software warns you before the sheet goes to the workshop.
Parametric models
W and H variables, IF/THEN rules: each model follows your formulas, and a built-in test checks the calculations before you price.
Each product on video
Slider, casements, door with slider, composite frame, partition: the training videos (in French) show each product in a project.
Frequently asked questions about aluminium windows
Which profile systems does CUTTER SOFT work with?
Any profile system, no supplier imposed: you create your profile systems, series, profiles, hardware and price lists, or our team prepares your session.
My window model is not in the list: what can I do?
Any other model can be set up: its profiles, its cutting formulas and its IF/THEN rules, with a built-in test to check the calculations. Our team can prepare it with you.
Does the software flag errors before the workshop?
Yes: a dimension outside the series limits, or glazing too thick or out of range, triggers an alert before the sheet goes to the workshop.
Is the frame drawn in its colour?
Yes, in the real colour of the bar: RAL powder coating, anodising or sublimation, as in your finishes catalogue.
Find out more
- Windows and doors
Every trade in aluminium joinery
Workshops, factories, installers and resellers.
- Windows and doors
Aluminium roller shutters
Slats, guide rails, tube and motor.
- Windows and doors
Curtain walls and façades
Grid, infills and structural calculation.
- Software
Cutting lists and optimisation
Accurate cuts, fewer offcuts.
- Software
Pricing and quotes
From W × H to a PDF quote.